80Vdc to 12Vdc 120w 240w 360w 480w Non-isolated voltage reducer

 Replace diode rectification with synchronous, over 93% efficient as high power density  Available for maximum pulse power exceeds 120% of the nominal rating  Wide voltage input , suitable for battery applications ( cell voltage of 1.65V ~ 2.50V)  Smaller, lighter and significantly more quiet than conventional converters  Short circuit / overload output protection (resume after the short circuit disappear)  Applicable to a variety of environmental , protection class IP54

Previous：80Vdc to 48Vdc 240w 480w Non-isolated voltage reducer

Next：72Vdc to 48Vdc 10A 480w Non-isolated voltage reducer

Description

Main technical data

Model	NQZB100-080-012C	NQZB200-080-012C	NQZB300-080-012C	NQZB400-080-012C
Input voltage	80V
Input voltage range	DC66V~100V
Output voltage	12V
Output voltage accuracy	5%
Output current	0~10A	0~20A	0~30A	0~40A
Output power	120W	240W	360W	480W
Key switch line starting current	20~30mA ＜9A@200ms
Conversion efficiency(full load)	≥90%
Static loss after low voltage protection	≤3mA (0.072W)
Protection circuit	Overcurrent protection, short circuit protection, self recovery
Insulation performance [circuit and ground (shell)]	≥500Ω/V @The AT is (23±2)℃ @The RH is 80%～90%
Insulation [direct dielectric strength of terminals to ground (shell) or circuits not electrically connected to each other]	≥2000V（DC）（Or rated voltage +1500V）@1min
Reliability	≥50000h @Fault free working time
Durability	≥10000h @105℃
Operating ambient temperature	-20~45℃
Relative humidity of working environment	5%～95%（No condensation ）
Waterproof grade	IP54
Mounting hole size	*5mm6mm6个*
Maximum overall dimension	*125mm92mm46mm*	*165mm92mm46mm*	*185mm92mm46mm*	*225mm92mm46mm*
L length in dimension drawing	100mm	140mm	160mm	200mm

Wiring mode

Installation size

See the length of L in the last row of the above technical date table for the corresponding size and length of each model

Precautions
Installation & safety instructions

The converter must be mounted on solid metal, aluminum for heat dissipation. The converter will be very hot during use, keep wiring from touching the converter and or do not touch it !
Confirm battery pack main positive and negetive potentials !
For older cars using a negative through key switch you must use a relay for converter activation. Consult technical services for this application. For radio memory you must either leave the key switch in the on position or hardwire the yellow and red wire to 36/48/60/72 volt positive. Doing this you will have a constant drain on the battery pack and long extended period of “setting” will help drain the battery pack. It is advised for long storage to disconnect the converter.
Anytime a battery pack is disconnected manufacturers instructions must be followed. Always make sure if the car has a run/tow switch the switch is placed in the tow position before disconnecting anything. Torque battery cable nuts to 80 to 100 inch pounds. Spray coat connections with anti corrosion spray. Tech Note: loose connection create heat and arcing make sure all wiring connections are clean and tight.
Make sure all wiring is free from moving parts, sharp objects or extreme hot area’s! Tie up any loose wiring
use process equipment will pay attention to timely remove surface dust and other debris impact of heat dissipations .
Please don’t disassemble the DC-DC converter yourself . it may cause electric shock or other injuries .
In order to avoid damaging the power cord , don’t put any object on the line and place the line where it will not be stepped on . If the cord is frayed or damaged , replace it immediately

Warranty: 12 months Limited Warranty from time of delivery

Recommend

12V 4A Special charger for lead-acid battery

The smart battery charger is a battery controlled by microcontrollers, which is suitable for 12V lead-acid batteries. Tech: Input: Voltage------------220-240 AC, 50/60Hz Current ----------Max. 0.2A Output: Voltage------------Max. 14.4 for 12v battery,7.2v for 6v battery Current ------------Max. 800mA Battery Range: -----------2.3Ah-12Ah/12v or 6V

12V 4A Special charger for lithium battery

The intelligent battery charger is a battery controlled by microcontroller and suitable for 12V lithium battery. TECH: Input: Voltage------------100~260 AC, 50/60Hz Current ----------Max. 0.5A Output: Voltage------------Max.14.7V Current------------max. 4a Battery Range: -----------2Ah-20Ah

12V 4A Lead acid and lithium hybrid charger

The intelligent battery charger is a hybrid battery controlled by microcontroller and suitable for lead-acid and lithium batteries. TECH: Input: Voltage------------100~260 AC, 50/60Hz Current ----------Max. 0.5A Output: Voltage------------Max.14.7V Current------------Max.4a Lead acid Battery Range: -----------2.3Ah-120Ah Lithium battery:--------------------------- 2-20Ah

96Vdc to 24Vdc 240w 360w 480w Isolated voltage reducer

 Replace diode rectification with synchronous, over88% efficient as high power density  Available for maximum pulse power exceeds 120% of the nominal rating  Wide voltage input , suitable for battery applications ( cell voltage of 1.65V ~ 2.50V)  Smaller, lighter and significantly more quiet than conventional converters  Short circuit / overload output protection (resume after the short circuit disappear)  Applicable to a variety of environmental , protection class IP54

96Vdc to 12Vdc 120w 240w 360w 480w Isolated voltage reducer

 Replace diode rectification with synchronous, over88% efficient as high power density  Available for maximum pulse power exceeds 120% of the nominal rating  Wide voltage input , suitable for battery applications ( cell voltage of 1.65V ~ 2.50V)  Smaller, lighter and significantly more quiet than conventional converters  Short circuit / overload output protection (resume after the short circuit disappear)  Applicable to a variety of environmental , protection class IP54

微信扫描关注我们

Working hours: Monday to Friday
8:00-17:00

Contact：Genna

Mobile：15359400086

Telephone：86-592-7089609

Email：saler01@xmdci.com

Address：A Jianye Building, Xiangxing Road,Xiang'an, Xiamen District, Fujian, China

The content, pictures and videos of this website are the demo data.
If copyright infringement is involved, please contact us to provide written feedback, and we will delete them immediately after verification.

Xiamen Digital Control Instrument CO.,LTD Copyright 闽ICP备08106845号

闽公网安备 35021302000375号

Technical Support：YMB Software